Flooring Tool Education

As a Bullet Tools Distributor, your success is our success! We want to be partners in your education. Watch this video playlist to learn about Bullet Tools’ Flooring Lines. Then see below for more information on our tools, our company, and our culture.

As a Distributor

There are a few things you’ll need to know. First of all, we are the Original! Dalen Gunn, the Bullet Tools’ founder, invented the first fixed-blade plank cutter in 1998. There are many knock-offs on the market, but no one matches our quality, our continuing innovation, or our customer service.

Secondly, we are proud to be an American manufacturer. All Bullet Tools are made in our original facility in Hayden, Idaho, U.S.A. The first video above is a walk through of our 15,000 square foot manufacturing and office buildings where we design, test, machine, and assemble all of our revolutionary tools. We also house our executive team plus purchasing, sales, graphic design, engineering, marketing, accounting, and customer service all at this location. When you or your customers call needing assistance, everyone in our company is here and available to serve you.

Lastly, we have a few different flooring tool lines, all of which can be seen on our Flooring Page. Our flooring cutter lines include:

Magnum Shears are the original, super heavy duty cutters. They are made with heavier, thicker aluminum beams and rails and more powerful bearings. The Magnum blades are also thicker for greater longevity. Magnum cutters usually weigh more, but they offer more strength and the ability to cut thicker, harder materials such as most hardwoods. They have a 5 year warranty and usually last much longer. The target market for Magnum Shears are contractors who install hardwood or thick laminate flooring, or those who install daily and want a long-lasting tool.

Magnum Soft Flooring Shears, or the RCT Line, are also available. These are very wide cutters made specifically for large carpet or vinyl tiles. They include an Angle Guide for perfect 45° cuts that are automatically repeatable. These cutters use a thinner blade to cut through soft products such as luxury vinyl, carpet, resilient, cork, and rubber tile. They come with casters so the cutters can be pushed along the floor instead of lifted – their size makes them heavy – and the casters are perfectly aligned to make exact wall cuts.

EZ Shears are lighter-duty cutters. They weigh less and are more portable because they use less aluminum in their beams and rails. EZ Blades are also slightly thinner to reduce cost and weight, but this gives an advantage to those cutting vinyl and laminate flooring. A thinner blade requires less force to push it through your material, so they are often easier to cut with. (They cannot cut hardwood as the blade will break.) EZ Shears are aimed at the DIY customer or contractors who want portability and don’t mind buying a new tool every couple of years. These quality, cost-effective tools have a 1 year warranty and usually last around 3 years.

We also sell the Bullet Line – tools specifically made to cut vinyl flooring and carpet quickly and consistently – as well as many Flooring Accessories including Tapping Blocks, Pull Bars, a Shear Stand, and a Stair Scribe.

See our Flooring Tools Page for the entire selection!

Did you know Flyers and Brochures are FREE for Dealers?

Plus, we offer Displays for our tools, free with a minimum purchase. Talk to your representative or call us for details today!  (208) 772-0175