A:
On some tile…. But it will only make one cut… After that the blade is ruined.
A:
Every cutter that we manufacture comes with a honing stone. This stone should be utilized frequently to remove any burrs that are created from usage. We do not recommend taking the blade to a sharpener as it reduces the blade height and makes the tool less effective.
A:
Bullet Tools does not give, sell or otherwise use your information with any other company. Your privacy is extremely important to us.
A:
Don't know, but it has been tried in other countries.
A:
Approximately 10,000 cuts on fiber cement products, 9 months on laminated wood products, 2 years on Vinyl Composite Tile, Resilient Tile, or Carpet Tile, and 3-9 months on Solid and Engineered Hardwood Flooring. These are all estimates, as there is such a wide array of materials available.
A:
With periodic honing and sharpening, hundreds or even thousands of cuts.
A:
The MAGNUM SHEAR is available in 9”, 13”. 20”, and 26” widths, the RCT Cutter is available in 20”, 30” and 40” models (other models can be custom built).
A:
Contact Bullet Tools about a factory recondition of your machine. We will be happy to see about making your baby look brand new!
A:
Besides keeping your workspace clean, cutting without dust holds major advantages for your health and safety.
A:
Yes! The combination of super-strong components, tremendous leverage, and a razor-sharp blade work together to give you a precision cut every time.
A:
This is an identified issue and is covered under “Repair Bulletin” 07-001. Please contact us for a complimentary repair kit.
A:
This is an identified issue and is covered under our “Bullet Proof Warranty”. Please contact us for a replacement.
A:
Without getting into specifics, the blade is made out of a high speed carbon, heat treated steel that is specifically made for our tools and their usage needs.
A:
Cuts a variety of building materials such as flooring, siding, roofing and more without power or creating dust.
A:
The PRO MAGNUM SHEAR is a heavier duty tool that cuts up to 1” product and is the recommended tool for heavy duty usage and dense material cutting (eg: hardwood flooring). The EZ Shear cuts up to 5/8” (16mm), and is primarily meant for laminate flooring and fiber cement siding products.
A:
The RCT Cutter was designed specifically for resilient tile and carpet tile. It utilizes a sharper blade that is ideal for cutting Vinyl Composite Tile (VCT) as well as carpet tiles. The RCT Cutter also has a modified table and angle guide that is specific for tile products.
A:
Primarily Aluminum Construction, with either a plastic or HDPE depending on the model.
A:
Just as the saw blade in your new chop saw there is no warranty against use. If you feel the damage due to your blade is cause due to manufacturers defects please contact us to obtain a Return Authorization (R.A.) number, and the address to ship the blade for inspection in consideration of a replacement.
A:
(insert link to our specified warranty here in the following text) NOOO worries… You’re covered under our “Bullet Proof Warranty”!!!
A:
Typically a saw-quality cut. On some products, you'll even achieve a factory edge!
A:
* Laminate Flooring... 15mm or 5/8"* And more!
A:
You have been sold the incorrect blade for your machine. If your original blade was smaller then you require an “X-Series” blade and have been sold a “Pro-Series” or “L-Series” blade and vise versa. (Click on the blade chart below)